With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this Shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this Shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

AbstractThe knowledge about pesticide residue in private wells is not well documented in Sweden.Previous studies have detected pesticide residue in private wells, this issue is what made themunicipality of Laholm commission the study. The purpose was to collect water samples from50 private wells in Laholm and have them analyzed for traces of pesticides. The wells in thestudy are spread geographical over the entire municipality. The analysis of the water sampleswas carried out by the accredited laboratory Eurofins. Nine of the 50 wells in this studycontained residue of pesticides and two of these exceeded the allowed concentration of 0,1 ?g/l.Nine different pesticides were detected, among these were BAM, Atrazin and breakdownproducts from Metribuzin.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

The Swedish parliament has decided that Sweden should increase its usage of renewable fuel sources to a level of 50% of the total energy consumption in Sweden by the year 2020. One way to reach that goal may be to increase the usage of stumps as a bio-fuel. In Sweden stump harvesting is possible on about 5-10% of the total harvested area and thus contribute with 1,3 - 2,6 TWh per year. An increase stump harvest doesn't come without its drawbacks for the environment. When harvesting stumps a tracked excavator is used to pry the stumps from the ground and then cut the stumps into smaller pieces.

This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This bachelor thesis discusses firefighting and the use of portable fireextinguishers in the salvageof historic artefacts focusing on textiles. It also looks into the use of multi-purpose dry chemicalextinguishers in a textile context and the impact the actual dry-agent has on textiles afterfirefighting.Literature studies, interviews and tests on different textiles were carried out to write this thesis.During the tests textiles were exposed to the dry agent and also to dry agent plus water toinvestigate the difference in residue. After vacuumcleaning it was clear that when the textile wasexposed to dry agent and water it was almost impossible to remove the chemical without rinsingin water.By examining the residue left on the textile using SEM it was possible to see if a textile was aswell decontaminated after vacuum-cleaning as it looks to the eye. We know that the dry agentoften consists of ammonium phosphate which acts corrosively on many materials and one canassume it damages textiles as well after longer exposure.Buildings housing cultural collections are vulnerable as we cannot easily replace ruined materialwith new.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

Agricultural soils constitute the base in human food production and soil content of organic matter and plant nutrients together with soil microbial activity are all important parameters for high crop yield of good quality. These parameters are dependant on proper fertilization.Anaerobic digestion of organic wastes for biogas production generates a liquid residue called biogas residue (BR). It contains organic material and plant nutrients which makes ita potential fertilizer for arable cropping. However, it also contains heavy metals and toxic organic compounds and it is therefore in need of evaluation before usage.Microbial tests were performed aiming to evaluate the agronomic traits of four different BR and to find a viable procedure for evaluating slurry fertilizers. Two experiments where soil respiration and soil potential denitrification activity (PDA) was measured at fertilizer addition were performed.

That ecological and evolutionary processes can take place on the same time scale is a recent insight. Today we also know that they are directly linked to each other. In the lake Tåkern, in year 2000, there was a structural change when phytoplankton declined and submerged vegetation, mainly stoneworts began to spread. This led to evolutionary changes in the aquatic sowbug, Asellus aquaticus which had previously been limited to the reed, most likely feeding on detritus. But then, sowbugs could exploit the new habitat in stoneworts and a new food resource in terms of periphyton.

In this essay, Neolithic potsherds from Alby, Öland has been examined. The purpose was to investigate the connection between the lipid residues and the vessel shapes and ornament. To solve the attempt lipid and morphological analyses were executed. The lipid analysis revealed traces of different food residues and the morphological method showed various shapes and decors. The result indicates that the Alby ceramics has been used for cooking/storage of different fish and meat dishes, as well as vegetables and that the vegetables doesn?t derive of cereals..

The aim of this paper was to study fourteen pottery sherds found at the site of Ayia Irini in northern Cyprus using Gas chromatography- Mass spectrometry. Ayia Irini has by the archaeologists of the Swedish Cyprus Expedition been interpreted as a sanctuary, with activity spanning from the Late Bronze Age throughout the Cypriot Iron Age.The results showed traces of vegetable lipids in almost all samples, and traces of lipids from terrestrial animals in all but two. One sample showed traces of resin. Several samples were contaminated by different components found in plastics, such as plasticizers. No obvious common denominators were found for samples of similar pottery type or similar dating.